Steel Slag Crushing Plant Manufacturer

Brief introduction of Mobile Steel Slag Crushing Plant

Mobile Steel Slag Crushing Plant is mainly used for crushing lime material of the main crushing equipment, lime material properties are very well understood. Driven by a Mobile Steel Slag Crushing Plant, the rotor rotates at high speed, and the lime material enters the crushing chamber and crushes against the plate hammer on the rotor, then enters the second fine crushing chamber for crushing, and then discharges from the outlet. The quality of the products produced is very high, and is very popular among users.

Operational considerations

  • 1. The Mobile Steel Slag Crushing Plant is allowed to start only under no load. Before starting, it must be warned by bell or signal. Check the equipment before, such as whether the parts are in normal condition; check the bolts of the connecting parts thoroughly to ensure no loosening or failure bolts.
  • 2. The first movable crusher can be put into production after normal operation. The lime materials to be crushed should be evenly added into the crusher chamber. The side feeding or full feeding should be avoided. At the same time, attention should be paid to listening in the work. Whether there is any abnormal noise inside the machine, if there is any, the machine should be stopped immediately.
  • 3. After the end of the Mobile Steel Slag Crushing Plant before the work, should stop feeding, until the crushing chamber material completely discharged, can turn off the power supply, willing to use the manufacturers and users with the following reasonable operation.

Advantages of Mobile Steel Slag Crushing Plant

  • 1, the adjustment range of the discharge port is large, which increases the flexibility of the equipment, and can meet various processing needs of users.
  • 2, and the equipment is reasonable in structure and occupies a small area. It can play a big role in the limited space.
  • 3. The moving jaw of the Mobile Steel Slag Crushing Plant is made of high-quality cast steel and is driven by two large cast steel flywheels. Thus increasing production capacity;
  • 4. It can meet the requirements of crushing various ores and rocks with crushing compressive strength of 147-245 MPa.

Working principle of Mobile Steel Slag Crushing Plant

The movable crusher is driven by an electric motor and driven by a triangular belt and a slot wheel with an eccentric shaft, so that the movable jaw moves back and forth according to a predetermined trajectory, thus crushing the materials into the crushing chamber composed of a fixed jaw plate, a movable jaw plate and a side guard plate, and discharging the finished materials through the lower discharge port.

Request a quotation

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).